MotoSat XF3 Parts
All parts are used except if the listing says new.

Don Marr
WWW.OREGONRV.NET
3498 W. 1st. Ave.,#7
Eugene, OR. 97402-5453
(541) 683-5361 - Days

Link to the MotoSat Parts MAIN PAGE:
http://www.motosatparts.com/

We have nearly any part needed for the XF series dishes. Just email or call for pricing and availability. Since MotoSat made in production changes it is advised to send a picture of your defective part for identification. Send to: mail@dmarr.com


XF3 mounting plate
MotoSat XF3 mounting plate #410-XFMPO72E - USED

   The mounting plate for the MotoSat XF3 satellite dish base. Aluminum plate about 24"x72". Two styles, one using a flat plate with 2 rails and the other is one piece that is formed to create the 'rails' (see pic).

$350 Used

XF control cable
MotoSat XF3 Control Cable - USED

   MotoSat XF3 Control Cable. varies 20+ ft long using 18awg wire. Comes with the end that attaches to the dish. The green connector that attaches to the controller is not included. Will show signs of use.

$229 Used

NEW XF control cable
MotoSat XF3 Control Cable - NEW

   MotoSat XF3 NEW Control Cable. 25' long using 18awg wire. Comes with the end that attaches to the dish. The green connector that attaches to the controller is not included. Custom orders for longer cables are available, add 2.50 ft.

$329 NEW

XF EL Count Sensor
MotoSat XF3 Elevation Count Sensor

   MotoSat XF3 Elevation Count Sensor. Will also work for the XF2.

$290 Used

XF Upper Control Board
MotoSat XF3 UCB

   MotoSat XF3 Upper Control Board (UCB). Different versions over the years so send a picture of yours for a match.

$775 Used
$895 New


Motosat skew motor
MotoSat XF3 Skew Motor

   XF3 Skew Motor Assembly #455A0076. Will also work for the XF2.

$329 Used

XF Reed Sensor
MotoSat XF3 Reed Sensor

   XF3 Reed sensor #413FAZ601.

$99 Used


AZ count sensor
Sensor, AZ count Sensor

   XF3 Magnetic AZ count Sensor (5 pin) - 413-A0037B. Several versions available.

$375 Used


XF GPS module
GPS module

   XF3 GPS module 413-A0033A. Some different versions of this, send a picture if yours is not like this one.

$249 Used


XF Skew Bushing, motor end
Skew Bushing, on motor side

   XF3 Skew delrin bushing 513-D00067A. Several versions of this part. Examine closely before ordering.

$75 Used



XF EL motor original
XF3 Azimuth/Elevation Motor

   XF3 EL motor (small, pre-2009) 455A0086

$300 Used


XF3 Large Elevation Motor, after 2009
XF3 Elevation Motor, Large

   XF3 Large EL motor (large, after 2009) 455A0088

$550 Used


XF3 Large Elevation Motor, after 2009
EL motor large WITH gear box

   XF3 EL motor (large) WITH gear box 455A0062

$750 Used


XF3 Elevation Motor replacement GEAR
XF3/XF2 Elevation Motor GEAR NEW

   XF3 EL motor gear for LARGE motor. New part, needs to be pressed on the motor shaft. Replaces small white plastic gear. MUCH stronger and made of metal and plastic.

$129 NEW


XF3 EL sprocket large 8"
XF3 EL sprocket gear large 8"

   XF3 EL sprocket large 8" sprocket 630-D00308A NEW. Sold in matching pairs.

$275 PAIR
NEW




EL Sprocket Chain Gear assembly
EL Sprocket Chain Gear assembly

   XF3 EL small sprocket chain worm gear assy

$450 Used


XF EL coil spring NEW
EL coil spring NEW

   XF3 EL coil spring. Not easy to replace.

$149 new


XF Elevation Chain
XF Elevation Chain

   XF2/3 EL Chain (105 Links) 632-25HD-106 standard

$78 new


XF Elevation Chain
XF Elevation Chain

   XF2/3 EL Chain (105 Links) 632-25HD-106 Stainless

$175 new


XF Elevation Chain Master Link
EL Chain Master Link

   XF2/3 EL Chain Master Link (Qty 2)

$15 pair



XF Azimuth Motor
Azimuth/Elevation Motor

   XF3 AZ motor 455A0086

$300


XF AZ gear box
XF AZ gear box

   XF Azimuth Gear Box, 12 tooth main gear

$350


XF3 AZ wheel roller
XF3 AZ wheel roller

   XF3 AZ wheel roller bearing bronze

$29


XF3 Skid bracket
XF3 Skid bracket

   XF3 Skid/Stow bracket white plastic. Many versions of these. Send a pic of yours for possible match.

$39


XF3 Skid bracket
XF3 Skid bracket

   XF3 Skid/Stow bracket 518D00377A white Acetal molded

$95



XF Skew Sprocket 1/2 gear
XF Skew Sprocket 1/2 gear

   XF Skew assembly Sprocket 1/2 gear (also used on the F2/3 series) chain driven by the skew motor

$69


XF Skew Upper Plastic Cover
XF Skew Upper Cover

   XF Skew Upper White Plastic Cover

$35


XF Skew Assembly Lower Plastic Cover
XF Skew Lower Cover

   XF Skew Lower Plastic Cover

$35


XF Skew Assembly Drive chain
Skew Assembly Drive Chain

   XF Skew Drive Chain, includes a new master link

$55


XF Feedhorn
XF Feedhorn

   XF Feedhorn

$119



XF3 Back Cover
XF3 back cover

   XF3 Reflector back cover white plastic. The problem is I have no way to ship these. A custom crate would be very expensive.

$250


XF3 plastic base center cover
XF3 plastic center base cover

   XF3 Base cover A white plastic (center helmet). Several versions of these so best to send a picture of your old one.

$135


XF3 plastic base cover
XF3 base cover

   XF3 Base cover B white plastic. Several versions (4) of these so best to send a picture of your old one.

$135


coming
MANY more parts available - email with your needs. Include pictures
mail@dmarr.com



CUSTOM PARTS:

F2/3,XF2/3 Skew side arm
Skew side arm

   Skew assy longer side arm to convert to a NJR 4 or 6 watt BUC. (2 needed). 13.17 inches long. Fits any MotoSat skewable arm assembly. NEW production.

$159 pair


Skewable assembly BUC Bushing
Skewable assembly BUC Bushing

   Skew rotation grey plastic bushing to convert BUC to a NJR 4 or 6 watt BUC (new custom part). Fits any MotoSat skewable arm assembly.

$135

= = = = = = = = = =




CHECK OUT or VIEW shopping cart



           Other item (not listed above) enter description and price
               Input name of item you are purchasing
               Input price of item you are purchasing
          




ALL SALES FINAL ! No returns or refunds !

Shipping & Handling

Minimum shipping is $10.00 in continental U.S.A., or higher for heavier items. Minimum $20 to Canada and Mexico; $25 to Western Europe, Australia, Asia and the Pacific Rim. Extra shipping cost for additional items. Air shipping available. Payment is by visa/mastercard/PayPal, money order or internet check. Please note that your credit card statement will have the billing name Don Marr.   We will normally ship within 3 business days from receipt of payment, personal checks 7 days. Weekends and holidays not included.


Don Marr
Eugene, Oregon

mail@dmarr.com


Thank You